Whoop V2 VTX

$59.49

Supports all HDZero MIPI cameras, including 540p90 , 720p60, and 1080p30 modes
Thicker PCB than Whoop Lite, providing greater impact resistance
Factory-soldered wire harness with Betaflight standard digital VTX plug
Brass antenna retention bar
Mounting Pattern: 25.5×25.5 M2

Out of stock

Free standard US shipping
Contiguous 48 states & DC · 4–7 business days total

30-day returns
Merchant-paid return shipping. Read the policy

Questions about this item? [email protected]

Product brand: HDZERO

SKU: N09-C15-421B5519C089 Category: Drone Accessories

The details

Meet your next everyday essential.

The
HDZero Whoop V2 VTX
produces sharp, low-latency HD video up to 200 mW while supporting all HDZero MIPI camera modes. Its thicker PCB, factory-soldered wiring harness, and brass antenna retention bar greatly improve durability and make installation more reliable and beginner-friendly. With a compact 31×31 mm footprint and 25.5×25.5 mm mounting pattern, it fits everything from tiny whoops to 4" micro drones. Operating on 1S–3S power, it’s an ideal upgrade for anyone seeking stronger performance and tougher construction in a lightweight VTX.

Check out all our
VTXs
and our
HDZero selection
.

Features

Supports all HDZero MIPI cameras, including 540p90 , 720p60, and 1080p30 modes

Thicker PCB than Whoop Lite, providing greater impact resistance

Factory-soldered wire harness with Betaflight standard digital VTX plug

Brass antenna retention bar

Specifications

Mounting Pattern: 25.5×25.5 M2

Dimensions: 31x31mm (29x29mm inner)

Video Connector: MIPI

Video Resolution: 720p60 / 540p90 / 1080p30

RF Power: 25mw/200mw

Control/OSD: MSP OSD / Smart Audio

Power Consumption: 5 – 6 W

Power input: 3 – 12.6 V (1S – 3S)

RF Connector: Secured U.FL with brass bar

Frequency: 5.725 – 5.850 GHz

Weight: 5.4g

IMPORTANT NOTES

No reverse-polarity protection — incorrect wiring will permanently damage the unit.

Ensure ≥ 1.5 A available current when powered from a 5 V pad.

Direct 1 S power may dip below 3 V on throttle punch-outs, causing video loss.

External capacitor recommended for 3S setups.

Includes

1x HDZero Whoop V2 VTX

4x Rubber grommet (M3 to M2)

5x Power/Uart cable

2x Zip ties

3x u.FL antenna retention screws

1x Metal bar

Know the fit

Specifications & selected options

Item: Whoop V2 VTX
SKU: N09-C15-421B5519C089
Product brand: HDZERO

produces sharp, low-latency HD video up to 200 mW while supporting all HDZero MIPI camera modes. Its thicker PCB, factory-soldered wiring harness, and brass antenna retention bar greatly improve durability and make installation more reliable and beginner-friendly. With a compact 31×31 mm footprint and 25.5×25.5 mm mounting pattern, it fits everything from tiny whoops to 4" micro drones. Operating on 1S–3S power, it’s an ideal upgrade for anyone seeking stronger performance and tougher construction in a lightweight VTX.

Dimensions: 31x31mm (29x29mm inner)

Weight: 5.4g

Choose & use with care

A few details before you begin.

Identify the aircraft and component

Identify the aircraft and component. Compare the actual item specifications and the supplied parts before choosing.

Match mounting and power requirements

Match mounting and power requirements. Compare the actual item specifications and the supplied parts before choosing.

Follow model-specific safety guidance

Follow model-specific safety guidance. Compare the actual item specifications and the supplied parts before choosing.

Follow the instructions supplied for the exact product. Features, limits and care directions are specific to the selected model.

Delivery, returns & support

Order preparation takes 1–3 business days, followed by 3–4 business days in transit: 4–7 business days in total. Standard shipping is free to the contiguous United States and DC, with no minimum order.

Request a return within 30 calendar days after delivery. We pay return shipping. After receipt, inspection and initiation of an approved refund take 5–7 business days.

Shipping Policy ↗Returns & Refunds ↗

Before you decide

Product questions

Where should I start when choosing drone & fpv accessories?

Identify the aircraft and component. Read the actual item description, included parts and options. The collection contains different models; a feature stated for one item should not be assumed for every product.

How do I check the size or fitting?

Match mounting and power requirements. Compare the dimensions and compatibility stated for the selected item with the space or equipment you intend to use. If a required measurement is absent, send the product name or SKU to [email protected] before purchasing.

Are different colors or configurations available?

Available choices are shown on the individual product page. Select the actual option labels before adding a variable product to your cart. Photos and specifications should be read together with that choice; availability is specific to the selected configuration.

What should I check before using an item?

Follow model-specific safety guidance. Follow the instructions supplied for the exact model. Do not assume that all items have the same materials, installation method, care directions or intended use.