Pavo35 Cinewhoop 3.5″ Micro Frame Kit

Pavo35 cinewhoop frame features newly engineered supports to reduce vibrations as well as being able to accommodate the strong thrust of 6S motors. The ducts are inspired by rocket nozzles to enhance horizontal stability. This frame has aluminum CNC metal supports & built-in XT-60 mount. 

Be sure to check out all our 
3.5" frames
, and the rest of our 
BetaFPV gear
!

Features

The innovative Y-shaped CNC metal support structure can improve the structural strength, torsion resistance, and vibration characteristics of the entire machine compared to aluminum columns, making it respond faster and more smoothly.

Rocket engine-inspired duct design improves lateral stability and increases thrust by 400g compared to without a propeller guard, giving the Pavo35 stronger power and a better flying feel.

The whoop duct is riveted and assembled, and the new appearance and design concept enables more effortless installation and a stronger structure.

Pavo35 Frame Kit

Pavo35 whoop duct can enhance an additional 400g thrust and also a CNC 7075 Aluminum Y shape standoff to eliminate distortion and bending during flight. Powerful and smooth flying is guaranteed. The modular design of the frame guarantees a streamlined appearance, with no protruding wires and the fixed power port design enables effortless one-handed connection. Assembling the frame is a breeze, requiring the simple tightening of the four bottom screws and utilizing the riveting design for convenient detachment of the duct.

The design of the whoop duct fully refers to the aerodynamic principle of the rocket engine nozzle and utilizes different heights and thicknesses between the upper edge and lower edge, through the compression of the inlet air within the duct, a substantial increase in exhaust pressure is achieved. Consequently, an additional thrust of 400g is generated, while simultaneously enhancing the horizontal stability of the cinewhoop. With augmented power and exceptional flight stability, executing challenging maneuvers such as flips and turns on the Pavo35 results in remarkably steady and precise responses. Pilots will experience an enhanced flying sensation.

The Y structural Shape standoff means 8 support force is on the top plate, increasing the structural strength of the quad, which results in smoother turns and minimal vibrations during flight. The CNC standoff is made with aircraft standard material – 7075 Aluminium Alloy to increase strength for ensure that pilots can embark on powerful flights with confidence. Additionally, the duct is securely fastened with only 4 screws, while the remaining connections employ the time-honored Chinese traditional riveting technique to ensure fast assembling and disassembling also including fixed power port design.

Specifications

Item: Pavo35 Brushless Whoop Frame

Wheelbase: 148mm

Top Plate: 3mm T700 carbon fiber

Base Plate: 1.5mm T700 carbon fiber

Gimbal Carbon Plate: 2mm T700 carbon fiber

Column: 7075 aluminum alloy CNC

Battery Holder: 7075 aluminum alloy CNC

Whoop Duct: PC injection-molded translucent gray

Whoop Duct
 
Diameter: 92mm

Battery Connector: Fixed XT60

Camera Installation Size: 20mm (compatible with 19mm)

HD VTX Installation Size: 25.5×25.5mm M1.6/20x20mm M2

HD VTX Antenna Mounting Hole Size: 4mm

Flight controller
 Mounting Hole Size
: 25.5×25.5mm

Motor
 Mounting Hole Size
: 4xM2 EQS ø12mm

Weight: 113.9g

Includes

1x Top Plate

1x Gimbal Carbon Plate

1x Base Plate

2x Battery Tie Holder

4x Y-shaped Aluminum Alloy Bracket

1x Whoop Duct

1x Receiver Holder

1x Amass XT60EW-M Socket (Black)

2x Battery Anti-slip Mat

1x Battery Tie

4x Flight Controller Amping Ball

4x Pan/Tilt Vibration Reduction Ball

4x Pan/Tilt Screws

2x Inner Hex Flat Head Screw M2.5×5

10x Inner Hex Flat Head Screw M2x6

4x Inner Hex Flat Head Screw M2x8

4x Inner Hex Flat Head Screw M2x10

4x Nylon nut M2

1x Accessory package

1x Service Card

1x Frame Manual