Lucid H7 Flight Controller – ICM42688

$55.49

Built for racing and freestyle
Plug-and-Play Connectivity
User-Friendly Design
Supports 4-in-1 ESCs
Versatile Application

Out of stock

Free standard US shipping
Contiguous 48 states & DC · 4–7 business days total

30-day returns
Merchant-paid return shipping. Read the policy

Questions about this item? [email protected]

Product brand: TBS

SKU: N09-C15-C41F670AD1C6 Category: Flight Electronics

The details

Meet your next everyday essential.

The
TBS Lucid H7 FC
is a powerhouse built for those who crave peak performance and adaptability in their drones. Whether you're ripping through freestyle moves or fine-tuning a racing rig, the TBS Lucid H7 delivers with its robust 480MHz processor and seamless support for Betaflight, ArduPilot, and INAV. Featuring dual camera inputs, DJI FPV OSD compatibility, and a compact design, it fits effortlessly into any setup. Designed for both seasoned pros and enthusiastic newcomers, this flight controller makes pushing the limits of your drone easier than ever.

Make sure to check out our other
Flight Controllers
as well as our
TBS Products!

Features

Built for racing and freestyle

Plug-and-Play Connectivity

User-Friendly Design

Supports 4-in-1 ESCs

Versatile Application

High Compatibility

Specifications

Analog Inputs: 6 ADC channels (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)

MCU: STM32H743VIH6 running at 480MHz, with 1MB RAM and 2MB Flash

LED Indicators: 3 LEDs – Blue and Green for FC status, Red for 3.3V power

Blackbox: Data logging equipped with a MicroSD card slot (SDIO)

PWM Outputs: 13 channels, including a dedicated “LED” pad

Power Control: Switch for filtered 5V/Vbat output power

Dual Camera Input: Switchable inputs for two cameras

UARTs: 7 total (1, 2, 3, 4, 6, 7, 8), signal inversion ready

USB Interface: Type-C connector (USB 2.0 standard)

DJI FPV OSD: Compatible via any spare UART port

Barometer: Infineon DPS310, connected via I2C2

Manufacturer: Triumph Manufacturing

Breakout: SPI3 breakout available

Gyro: ICM42688 x2 (duo gyro)

OSD Chip: AT7456E (SPI2)

I2C Buses: 2 available

CAN Bus: 1 available

JST Connectors:

1x JST-SH1.0 8-pin (Vbat/G/Curr/Rx8/S1/S2/S3/S4)

1x JST-GH1.25 4-pin (5V/CAN-H/CAN-L/Ground)

Power

Power Consumption: 200mA @ 5V with Betaflight, 150mA @ 5V with ArduPilot

Voltage Support: ADC Vbat2 pad supports up to 36V (1K:10K voltage divider)

BEC: 5V 2A continuous (3A max) & 9V 2A continuous (3A max)

Input Voltage: 6–36V (2 to 8S LiPo)

LDO 3.3V: Supports up to 200mA

Links

TBS Lucid Manual

Includes

1x TBS Lucid H7 FC

1x FC-to-ESC cable (plug & play)

1x DJI O3 cable (plug & play)

4x M3 rubber dampers

4x M3x8 screws

Know the fit

Specifications & selected options

Item: Lucid H7 Flight Controller - ICM42688
SKU: N09-C15-C41F670AD1C6
Product brand: TBS

Voltage Support: ADC Vbat2 pad supports up to 36V (1K:10K voltage divider)

Input Voltage: 6–36V (2 to 8S LiPo)

Choose & use with care

A few details before you begin.

Identify the aircraft and component

Identify the aircraft and component. Compare the actual item specifications and the supplied parts before choosing.

Match mounting and power requirements

Match mounting and power requirements. Compare the actual item specifications and the supplied parts before choosing.

Follow model-specific safety guidance

Follow model-specific safety guidance. Compare the actual item specifications and the supplied parts before choosing.

Follow the instructions supplied for the exact product. Features, limits and care directions are specific to the selected model.

Delivery, returns & support

Order preparation takes 1–3 business days, followed by 3–4 business days in transit: 4–7 business days in total. Standard shipping is free to the contiguous United States and DC, with no minimum order.

Request a return within 30 calendar days after delivery. We pay return shipping. After receipt, inspection and initiation of an approved refund take 5–7 business days.

Shipping Policy ↗Returns & Refunds ↗

Before you decide

Product questions

Where should I start when choosing drone & fpv accessories?

Identify the aircraft and component. Read the actual item description, included parts and options. The collection contains different models; a feature stated for one item should not be assumed for every product.

How do I check the size or fitting?

Match mounting and power requirements. Compare the dimensions and compatibility stated for the selected item with the space or equipment you intend to use. If a required measurement is absent, send the product name or SKU to [email protected] before purchasing.

Are different colors or configurations available?

Available choices are shown on the individual product page. Select the actual option labels before adding a variable product to your cart. Photos and specifications should be read together with that choice; availability is specific to the selected configuration.

What should I check before using an item?

Follow model-specific safety guidance. Follow the instructions supplied for the exact model. Do not assume that all items have the same materials, installation method, care directions or intended use.