Identify the aircraft and component
Identify the aircraft and component. Compare the actual item specifications and the supplied parts before choosing.
Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 20×20
$56.99
- Input Voltage: 3–6S LiPo
- Continuous Current: 80A per channel
- Burst Current: 100A (up to 3 seconds)
- Firmware: AM32
- MCU: AT32F421 with built-in gate driver
Free standard US shipping
Contiguous 48 states & DC · 4–7 business days total
30-day returns
Merchant-paid return shipping. Read the policy
Questions about this item? [email protected]
Product brand: NewBeeDrone
The details
Meet your next everyday essential.
Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 20×20 Design for Extreme Racer
The
Hummingbird 200 RaceSpec 4in1 ESC
is a compact, race-tuned 20×20 ESC engineered for the brutal demands of 5” FPV racing. Developed in collaboration with pro pilot
Kyle Buell (Twidgit)
, it directly addresses real pain points racers face—overheating MOSFETs, pad failures after crashes, and oversized ESCs that don’t fit low-profile frames.
With
80A continuous current per channel
and
100A burst
, this ESC delivers the raw, reliable performance needed to win heats. It supports
3
–6S LiPo input
, making it perfect for today’s high-throttle 5” race setups.
The board is built on a
6-layer PCB with 3oz copper
,
blind vias
, and a
gold-plated finish
, ensuring excellent thermal handling and structural durability. Two onboard
400W TVS diodes
provide effective surge protection without requiring external components, keeping your build clean and protected.
A standout feature is the
3D motor pad structure
—each motor pad wraps around the top, bottom, and side of the board. When properly soldered, this creates a grip-like bond that’s far more resistant to pad delamination, even after hard crashes or broken arms.
Powered by an
AT32F421 MCU with integrated gate driver
, the ESC runs smooth, responsive
AM32 firmware
, giving racers reliable performance and open-source configurability in a compact 20×20 footprint.
Whether you’re chasing podiums or rebuilding mid-event, the Hummingbird 200 RaceSpec ESC is built to handle it all—with the performance you need and the reliability you can trust.
Spec:
Input Voltage: 3–6S LiPo
Continuous Current: 80A per channel
Burst Current: 100A (up to 3 seconds)
Firmware: AM32
MCU: AT32F421 with built-in gate driver
TVS Protection: 2x onboard TVS diodes (400W each)
Motor Pads: 3D structure – top / bottom / side solderable
PCB: 6-layer, 3oz copper, blind vias, gold-plated finish
Signal Connector: 8-pin JST-SH 1.0
Power Pads: Reinforced BAT+ / BAT– for high-current builds
Mounting Pattern: 20x20mm (M3 holes)
Dimensions: 35 x 45 mm (including solder pads)
Weight: ~13.9g (without wires or capacitors)
Use Case: 5” FPV racing, optimized for extreme reliability
User Guide:
Link
Wire Diagram:
Include:
1x Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 20×20 Design for Extreme Racer
5x Grommet
1x 14awg Power cable
1x XT60 Plug
1x 8Pin 100mm Silicone Cable for FC Connection
1x 1000uf Capacitor
2x Tiny heat shrink for capacitor
Know the fit
Specifications & selected options
- Item
- Hummingbird 200 ESC RaceSpec 80A 3-6S AM32 20x20
- SKU
- N09-C15-286EBF6D9F25
- Product brand
- NewBeeDrone
, it directly addresses real pain points racers face—overheating MOSFETs, pad failures after crashes, and oversized ESCs that don’t fit low-profile frames.
Input Voltage: 3–6S LiPo
Dimensions: 35 x 45 mm (including solder pads)
Weight: ~13.9g (without wires or capacitors)
1x 8Pin 100mm Silicone Cable for FC Connection
Choose & use with care
A few details before you begin.
Match mounting and power requirements
Match mounting and power requirements. Compare the actual item specifications and the supplied parts before choosing.
Follow model-specific safety guidance
Follow model-specific safety guidance. Compare the actual item specifications and the supplied parts before choosing.
Follow the instructions supplied for the exact product. Features, limits and care directions are specific to the selected model.
Delivery, returns & support
Order preparation takes 1–3 business days, followed by 3–4 business days in transit: 4–7 business days in total. Standard shipping is free to the contiguous United States and DC, with no minimum order.
Request a return within 30 calendar days after delivery. We pay return shipping. After receipt, inspection and initiation of an approved refund take 5–7 business days.
Before you decide
Product questions
Where should I start when choosing drone & fpv accessories?
Identify the aircraft and component. Read the actual item description, included parts and options. The collection contains different models; a feature stated for one item should not be assumed for every product.
How do I check the size or fitting?
Match mounting and power requirements. Compare the dimensions and compatibility stated for the selected item with the space or equipment you intend to use. If a required measurement is absent, send the product name or SKU to [email protected] before purchasing.
Are different colors or configurations available?
Available choices are shown on the individual product page. Select the actual option labels before adding a variable product to your cart. Photos and specifications should be read together with that choice; availability is specific to the selected configuration.
What should I check before using an item?
Follow model-specific safety guidance. Follow the instructions supplied for the exact model. Do not assume that all items have the same materials, installation method, care directions or intended use.
